Why is professional AC cleaning important in Dubai homes and offices?

Dubai’s climate creates constant high humidity inside AC systems, which encourages microbial growth. Without proper cleaning, AC units can circulate contaminants throughout indoor spaces.

How is Saniservice different from standard AC cleaning companies in the UAE?

Most AC cleaners focus on visible dust. Saniservice follows a scientific indoor environmental remediation process that targets microbial sources, moisture behavior, and airflow contamination.

Is AC mould common in Dubai buildings?

Yes. Due to year-round AC use, high humidity, and sealed buildings, AC-related microbial growth is extremely common in Dubai residential and commercial properties.

Why does simple AC duct cleaning often fail to solve air quality issues?

Duct cleaning alone does not address coils, drain pans, humidity imbalance, or microbial reservoirs. Without correcting these, contamination quickly returns.

How does Saniservice assess whether an AC system is contaminated?

We begin with system inspection and risk assessment, examining moisture patterns, airflow paths, and areas prone to microbial growth rather than relying on visual assumptions.

Why is fogging not an effective AC disinfection method?

Fogging treats air temporarily but does not remove contamination from coils, drains, or surfaces where microbes grow. It masks symptoms without solving root causes.

Can bleach be used safely inside AC systems?

Bleach fails because it does not penetrate biofilms, can corrode components, and does not correct humidity conditions that allow regrowth.

How does humidity affect AC hygiene in the UAE climate?

Humidity is the primary driver of microbial growth. Without addressing moisture behavior inside the system, cleaning alone will not deliver lasting results.

What does “medical-grade AC disinfection” actually mean?

It refers to controlled cleaning and disinfection methods aligned with indoor environmental health standards, not perfumes or cosmetic sanitizers.

How does Saniservice verify that AC cleaning was effective?

Where required, we use pre- and post-intervention validation methods to confirm that contamination levels have been meaningfully reduced.

Is AC cleaning necessary even if there is no visible mould?

Yes. Microbial contamination often exists inside coils and drains long before visible signs appear, especially in Dubai’s climate.

How often should AC systems be cleaned in Dubai?

Frequency depends on usage, humidity levels, and building type, but most UAE properties require more frequent intervention than cooler climates.

Can poor AC hygiene affect health?

Contaminated AC systems can circulate microbial fragments and irritants that may worsen respiratory symptoms and indoor comfort.

Why does Saniservice sometimes clean less than other companies?

Our methodology focuses on correct intervention. We avoid unnecessary disturbance that can spread contamination or damage system components.

Is this service suitable for villas, apartments, and commercial buildings?

Yes. The same scientific principles apply across residential, commercial, and sensitive environments in the UAE.

How does Saniservice handle AC cleaning in occupied spaces?

We use controlled procedures designed to minimize disruption and prevent the spread of contaminants during cleaning.

What role does airflow play in AC contamination?

Improper airflow allows moisture and particles to settle, creating ideal conditions for microbial growth inside the system.

Can AC cleaning reduce recurring odours?

Yes, when odours are caused by microbial growth or trapped moisture, addressing the source eliminates the problem rather than masking it.

Why is source identification important before disinfection?

Disinfection without understanding the cause leads to recurrence. Our process identifies why contamination formed in the first place.

Who should consider Saniservice’s AC cleaning and disinfection service?

Clients in Dubai who prioritize verified indoor air quality, occupant health, and long-term building performance rather than superficial cleaning.

How can I prevent dampness near the window?« Back to Previous Page

After the rain last month, I noticed a persistent dampness in the corner of our living room. The area near the window gets particularly humid, even after we’ve run the dehumidifier all day. My kids have been complaining of coughs and sneezes more frequently since then. What can I do to prevent this from happening again?

Posted by Emily Clark

Asked on January 24, 2026 5:03 pm

▲

▼

Hello! I'm glad to help with your concerns regarding dampness near the window and its impact on indoor air quality. In Dubai, it's quite common for dampness to occur after heavy rains or high humidity periods, which can indeed lead to a range of issues including mold growth, dust mite proliferation, and respiratory problems like coughs and sneezes.

First things first, I'd recommend that you call 800-MOLDS or email hello@saniservice.com for a professional inspection. This is especially important given the persistent dampness you're experiencing. A professional can identify if there's any underlying structural issues or signs of mold growth which could pose health risks.

To prevent this from happening again, here are some steps to consider:

1. Ventilation: Ensure that your living room has proper ventilation. Open windows for a few hours after it rains to allow the area to dry out. In Dubai, this might not be practical during winter due to cooler temperatures, so use exhaust fans or dehumidifiers.

2. Dehumidification: Continue using your dehumidifier but consider placing it in the most humid areas of your home, like the corner near the window. Also, ensure it's properly maintained and emptied regularly to avoid overflow that could exacerbate dampness issues.

3. Sealing Gaps: Check for any gaps around windows or doors where moisture might be entering. Use weatherstripping materials to seal these gaps effectively.

4. Air Circulation: Improve air circulation in your home with ceiling fans or portable ones. Good airflow can help dry out the area and reduce humidity levels.

5. Use of Dampness-Resistant Materials: If possible, replace carpeting near windows with tile, wood, or laminate flooring which are less prone to moisture damage.

6. Professional Treatment: If you find any signs of mold during your inspection, treating it promptly is crucial. Mold can grow quickly and produce spores that can irritate respiratory systems. A professional service will be able to address the issue safely.

7. Regular Maintenance: Keep an eye on your home’s interior for any recurring dampness or musty odors. Regularly inspecting areas prone to moisture issues can help catch problems early.

By taking these proactive measures, you can significantly reduce the risk of dampness and improve indoor air quality in your living space. Remember, a small investment in prevention now could save you from bigger health and financial issues later on!

Hope this helps!

Posted by

Sani Admin

Answered on January 28, 2026 2:11 pm