Why is professional AC cleaning important in Dubai homes and offices?

Dubai’s climate creates constant high humidity inside AC systems, which encourages microbial growth. Without proper cleaning, AC units can circulate contaminants throughout indoor spaces.

How is Saniservice different from standard AC cleaning companies in the UAE?

Most AC cleaners focus on visible dust. Saniservice follows a scientific indoor environmental remediation process that targets microbial sources, moisture behavior, and airflow contamination.

Is AC mould common in Dubai buildings?

Yes. Due to year-round AC use, high humidity, and sealed buildings, AC-related microbial growth is extremely common in Dubai residential and commercial properties.

Why does simple AC duct cleaning often fail to solve air quality issues?

Duct cleaning alone does not address coils, drain pans, humidity imbalance, or microbial reservoirs. Without correcting these, contamination quickly returns.

How does Saniservice assess whether an AC system is contaminated?

We begin with system inspection and risk assessment, examining moisture patterns, airflow paths, and areas prone to microbial growth rather than relying on visual assumptions.

Why is fogging not an effective AC disinfection method?

Fogging treats air temporarily but does not remove contamination from coils, drains, or surfaces where microbes grow. It masks symptoms without solving root causes.

Can bleach be used safely inside AC systems?

Bleach fails because it does not penetrate biofilms, can corrode components, and does not correct humidity conditions that allow regrowth.

How does humidity affect AC hygiene in the UAE climate?

Humidity is the primary driver of microbial growth. Without addressing moisture behavior inside the system, cleaning alone will not deliver lasting results.

What does “medical-grade AC disinfection” actually mean?

It refers to controlled cleaning and disinfection methods aligned with indoor environmental health standards, not perfumes or cosmetic sanitizers.

How does Saniservice verify that AC cleaning was effective?

Where required, we use pre- and post-intervention validation methods to confirm that contamination levels have been meaningfully reduced.

Is AC cleaning necessary even if there is no visible mould?

Yes. Microbial contamination often exists inside coils and drains long before visible signs appear, especially in Dubai’s climate.

How often should AC systems be cleaned in Dubai?

Frequency depends on usage, humidity levels, and building type, but most UAE properties require more frequent intervention than cooler climates.

Can poor AC hygiene affect health?

Contaminated AC systems can circulate microbial fragments and irritants that may worsen respiratory symptoms and indoor comfort.

Why does Saniservice sometimes clean less than other companies?

Our methodology focuses on correct intervention. We avoid unnecessary disturbance that can spread contamination or damage system components.

Is this service suitable for villas, apartments, and commercial buildings?

Yes. The same scientific principles apply across residential, commercial, and sensitive environments in the UAE.

How does Saniservice handle AC cleaning in occupied spaces?

We use controlled procedures designed to minimize disruption and prevent the spread of contaminants during cleaning.

What role does airflow play in AC contamination?

Improper airflow allows moisture and particles to settle, creating ideal conditions for microbial growth inside the system.

Can AC cleaning reduce recurring odours?

Yes, when odours are caused by microbial growth or trapped moisture, addressing the source eliminates the problem rather than masking it.

Why is source identification important before disinfection?

Disinfection without understanding the cause leads to recurrence. Our process identifies why contamination formed in the first place.

Who should consider Saniservice’s AC cleaning and disinfection service?

Clients in Dubai who prioritize verified indoor air quality, occupant health, and long-term building performance rather than superficial cleaning.

How can I restore shine to my marble floors?« Back to Previous Page

The marble floors in my living room are starting to look dull and scratched, and I've only had them installed about six months ago. I noticed it after hosting a dinner party last weekend when guests commented on how they seemed less shiny than before. I’ve been using regular cleaners, but I’m worried I might be damaging them further. How can I properly clean and restore the luxury finish on my marble floors without causing any harm?

Posted by Elizabeth Anderson

Asked on November 24, 2025 3:08 pm

▲

▼

Restoring the shine to your marble floors requires a careful approach, especially considering the unique environmental conditions in Dubai and the specific qualities of luxury marble. Here are some actionable steps you can take to ensure your marble maintains its elegance without causing further damage.

Firstly, it's essential to recognize that regular household cleaners can be abrasive and acidic, leading to dullness and scratches on marble surfaces. Instead, opt for pH-neutral cleaners specifically designed for marble. You can find these at specialized home improvement stores or marble supply shops. Always read the label to ensure it is safe for your type of marble.

For routine cleaning, use a soft mop or cloth to gently wipe the surface. Avoid using scrubbing pads or rough materials that can scratch the marble. After cleaning, rinse the floor with clean water to remove any residue and dry it thoroughly with a soft towel to prevent water spots.

If your marble is showing deeper scratches or etching, you may need to consider professional polishing. This process involves using diamond polishing pads and specialized equipment to restore the surface’s shine. In Dubai, there are several professional services available that specialize in marble restoration. It’s advisable to get an inspection first to assess the extent of the damage. For serious cases, don’t hesitate to call 800-MOLDS or 800-66537 for a consultation or email hello@saniservice.com for expert advice.

Additionally, consider applying a marble sealer after cleaning and polishing. This will help protect the surface from stains and future damage, as the UAE's climate can lead to increased wear and tear on surfaces. Sealing should be done every 6 to 12 months, depending on the level of foot traffic in your living space.

Lastly, to maintain luster, avoid placing heavy furniture directly on the marble. Use felt pads underneath furniture legs and regularly rearrange items to prevent uneven wear.

In summary, to restore the shine to your marble floors, switch to a pH-neutral cleaner, engage in gentle cleaning practices, consider professional polishing for significant damage, and apply a protective sealer. By following these steps, you can keep your marble floors looking luxurious and pristine for years to come.

Posted by

Sani Admin

Answered on November 28, 2025 2:15 pm