Why is professional AC cleaning important in Dubai homes and offices?

Dubai’s climate creates constant high humidity inside AC systems, which encourages microbial growth. Without proper cleaning, AC units can circulate contaminants throughout indoor spaces.

How is Saniservice different from standard AC cleaning companies in the UAE?

Most AC cleaners focus on visible dust. Saniservice follows a scientific indoor environmental remediation process that targets microbial sources, moisture behavior, and airflow contamination.

Is AC mould common in Dubai buildings?

Yes. Due to year-round AC use, high humidity, and sealed buildings, AC-related microbial growth is extremely common in Dubai residential and commercial properties.

Why does simple AC duct cleaning often fail to solve air quality issues?

Duct cleaning alone does not address coils, drain pans, humidity imbalance, or microbial reservoirs. Without correcting these, contamination quickly returns.

How does Saniservice assess whether an AC system is contaminated?

We begin with system inspection and risk assessment, examining moisture patterns, airflow paths, and areas prone to microbial growth rather than relying on visual assumptions.

Why is fogging not an effective AC disinfection method?

Fogging treats air temporarily but does not remove contamination from coils, drains, or surfaces where microbes grow. It masks symptoms without solving root causes.

Can bleach be used safely inside AC systems?

Bleach fails because it does not penetrate biofilms, can corrode components, and does not correct humidity conditions that allow regrowth.

How does humidity affect AC hygiene in the UAE climate?

Humidity is the primary driver of microbial growth. Without addressing moisture behavior inside the system, cleaning alone will not deliver lasting results.

What does “medical-grade AC disinfection” actually mean?

It refers to controlled cleaning and disinfection methods aligned with indoor environmental health standards, not perfumes or cosmetic sanitizers.

How does Saniservice verify that AC cleaning was effective?

Where required, we use pre- and post-intervention validation methods to confirm that contamination levels have been meaningfully reduced.

Is AC cleaning necessary even if there is no visible mould?

Yes. Microbial contamination often exists inside coils and drains long before visible signs appear, especially in Dubai’s climate.

How often should AC systems be cleaned in Dubai?

Frequency depends on usage, humidity levels, and building type, but most UAE properties require more frequent intervention than cooler climates.

Can poor AC hygiene affect health?

Contaminated AC systems can circulate microbial fragments and irritants that may worsen respiratory symptoms and indoor comfort.

Why does Saniservice sometimes clean less than other companies?

Our methodology focuses on correct intervention. We avoid unnecessary disturbance that can spread contamination or damage system components.

Is this service suitable for villas, apartments, and commercial buildings?

Yes. The same scientific principles apply across residential, commercial, and sensitive environments in the UAE.

How does Saniservice handle AC cleaning in occupied spaces?

We use controlled procedures designed to minimize disruption and prevent the spread of contaminants during cleaning.

What role does airflow play in AC contamination?

Improper airflow allows moisture and particles to settle, creating ideal conditions for microbial growth inside the system.

Can AC cleaning reduce recurring odours?

Yes, when odours are caused by microbial growth or trapped moisture, addressing the source eliminates the problem rather than masking it.

Why is source identification important before disinfection?

Disinfection without understanding the cause leads to recurrence. Our process identifies why contamination formed in the first place.

Who should consider Saniservice’s AC cleaning and disinfection service?

Clients in Dubai who prioritize verified indoor air quality, occupant health, and long-term building performance rather than superficial cleaning.

How can I safely remove mold from storage closet?« Back to Previous Page

The other day, I was cleaning out my storage closet in the hallway and stumbled upon a moldy box that had been pushed to the back. It's been extremely humid lately here in Dubai, and I think the combination of the heat and some leaks from the AC unit caused this mess. I’m worried about the health implications since the closet is near the kids’ play area. What’s the best way to tackle this mold situation, and should I be concerned about it spreading?

Posted by Sarah Thomas

Asked on November 27, 2025 6:18 am

▲

▼

Removing mold from your storage closet requires careful attention, especially considering the humid climate in Dubai which can exacerbate mold growth. Here’s a step-by-step approach to tackle the mold situation safely and effectively.

1. Assess the Extent of the Problem: Before you start cleaning, determine how extensive the mold growth is. If you notice a small patch (less than a square meter), you can usually handle it yourself. However, if the mold covers a larger area, it’s best to contact a professional mold remediation service to prevent health risks and ensure proper removal.

2. Wear Protective Gear: If you decide to proceed with the cleaning, make sure to wear protective gear. This includes gloves, a mask (preferably an N95 respirator), and goggles to protect yourself from mold spores.

3. Ventilate the Area: Open windows and doors to improve airflow in the storage closet. If possible, use fans to help circulate air, but avoid using them if the mold is extensive, as it could spread spores into the air.

4. Cleaning Solution: Mix a solution of water and detergent or use a commercial mold remover. A mixture of one cup of bleach to one gallon of water can be effective, but ensure that you are in a well-ventilated area and do not mix bleach with other cleaning agents, as this can produce toxic fumes.

5. Scrub the Affected Areas: Using a brush or cloth, scrub the moldy surfaces gently to avoid damaging any materials. Be thorough, ensuring you remove all visible mold. Pay close attention to corners and hidden spaces where mold can thrive.

6. Dry the Area Completely: After cleaning, dry the area thoroughly. Use fans or dehumidifiers to reduce moisture in the closet, which is crucial in preventing mold from returning.

7. Prevent Future Growth: To minimize the chances of mold returning, consider improving the ventilation in your storage closet. Regularly check for leaks or moisture buildup, especially from your AC unit. It could also be beneficial to install a dehumidifier or moisture-absorbing products.

8. Monitor for Recurrence: Keep an eye on the area for signs of mold returning. If you notice any new growth or if the smell persists, it’s advisable to consult with a professional mold inspector.

In Dubai, mold growth can pose health risks, particularly for children and individuals with respiratory issues. If you’re feeling uncertain about handling the situation on your own or if the mold appears to be extensive, don’t hesitate to reach out for professional help. You can contact Saniservice by calling 800-MOLDS (800-66537) or emailing hello@saniservice.com for a thorough inspection and remediation.

Taking prompt action is key to ensuring a safe environment for your family, particularly near the kids’ play area.

Posted by

Sani Admin

Answered on December 2, 2025 10:47 am