Why is professional AC cleaning important in Dubai homes and offices?

Dubai’s climate creates constant high humidity inside AC systems, which encourages microbial growth. Without proper cleaning, AC units can circulate contaminants throughout indoor spaces.

How is Saniservice different from standard AC cleaning companies in the UAE?

Most AC cleaners focus on visible dust. Saniservice follows a scientific indoor environmental remediation process that targets microbial sources, moisture behavior, and airflow contamination.

Is AC mould common in Dubai buildings?

Yes. Due to year-round AC use, high humidity, and sealed buildings, AC-related microbial growth is extremely common in Dubai residential and commercial properties.

Why does simple AC duct cleaning often fail to solve air quality issues?

Duct cleaning alone does not address coils, drain pans, humidity imbalance, or microbial reservoirs. Without correcting these, contamination quickly returns.

How does Saniservice assess whether an AC system is contaminated?

We begin with system inspection and risk assessment, examining moisture patterns, airflow paths, and areas prone to microbial growth rather than relying on visual assumptions.

Why is fogging not an effective AC disinfection method?

Fogging treats air temporarily but does not remove contamination from coils, drains, or surfaces where microbes grow. It masks symptoms without solving root causes.

Can bleach be used safely inside AC systems?

Bleach fails because it does not penetrate biofilms, can corrode components, and does not correct humidity conditions that allow regrowth.

How does humidity affect AC hygiene in the UAE climate?

Humidity is the primary driver of microbial growth. Without addressing moisture behavior inside the system, cleaning alone will not deliver lasting results.

What does “medical-grade AC disinfection” actually mean?

It refers to controlled cleaning and disinfection methods aligned with indoor environmental health standards, not perfumes or cosmetic sanitizers.

How does Saniservice verify that AC cleaning was effective?

Where required, we use pre- and post-intervention validation methods to confirm that contamination levels have been meaningfully reduced.

Is AC cleaning necessary even if there is no visible mould?

Yes. Microbial contamination often exists inside coils and drains long before visible signs appear, especially in Dubai’s climate.

How often should AC systems be cleaned in Dubai?

Frequency depends on usage, humidity levels, and building type, but most UAE properties require more frequent intervention than cooler climates.

Can poor AC hygiene affect health?

Contaminated AC systems can circulate microbial fragments and irritants that may worsen respiratory symptoms and indoor comfort.

Why does Saniservice sometimes clean less than other companies?

Our methodology focuses on correct intervention. We avoid unnecessary disturbance that can spread contamination or damage system components.

Is this service suitable for villas, apartments, and commercial buildings?

Yes. The same scientific principles apply across residential, commercial, and sensitive environments in the UAE.

How does Saniservice handle AC cleaning in occupied spaces?

We use controlled procedures designed to minimize disruption and prevent the spread of contaminants during cleaning.

What role does airflow play in AC contamination?

Improper airflow allows moisture and particles to settle, creating ideal conditions for microbial growth inside the system.

Can AC cleaning reduce recurring odours?

Yes, when odours are caused by microbial growth or trapped moisture, addressing the source eliminates the problem rather than masking it.

Why is source identification important before disinfection?

Disinfection without understanding the cause leads to recurrence. Our process identifies why contamination formed in the first place.

Who should consider Saniservice’s AC cleaning and disinfection service?

Clients in Dubai who prioritize verified indoor air quality, occupant health, and long-term building performance rather than superficial cleaning.

How can I stop mold growth in my living room?« Back to Previous Page

After the rain last month, I noticed a damp smell lingering in the living room, especially when the air conditioning kicks on. The windows are sealed shut most of the time due to the heat, but it’s still persistent. I suspect there might be some mold or mildew starting to grow behind the curtains and on the corners near the floor vents. What can I do to prevent this from getting worse and how can I address it now before it spreads?

Posted by Mary Thomas

Asked on February 5, 2026 7:12 pm

▲

▼

Cleaning Airborne Mold in Your Living Room

Hey there! It sounds like you're dealing with some dampness issues that could potentially lead to mold growth. In the UAE and specifically Dubai, it's crucial to address such problems promptly as they can affect your indoor air quality significantly.

First things first, let’s tackle why mold might be developing in your living room. The most likely culprits are high humidity levels or even a minor water leak that you haven't noticed yet. In the UAE, during the summer months, high temperatures and minimal ventilation can make it perfect for molds to grow, especially behind curtains and near floor vents.

To prevent further growth and to address the issue at hand, here's what you should do:

1. Inspection: It’s highly recommended that you call a professional mold inspection service. In Dubai, companies like Saniservice (call 800-MOLDS or email hello@saniservice.com) can help you determine if there are any active mold colonies and the extent of the problem.

2. Ventilation: Since windows in your area are sealed shut most of the time due to heat, try to increase natural ventilation when possible. Open a window for short periods during cooler times or use exhaust fans to reduce moisture levels.

3. Dehumidification: Consider purchasing and using a dehumidifier. In Dubai, where humidity can be high, these devices are essential tools in combating mold growth. Aim to keep the relative humidity below 60%.

4. Cleaning: For visible mold spots, clean them thoroughly with a mixture of water and bleach (1 part bleach to 10 parts water). Be sure to wear gloves and ventilate the room while cleaning. It's important to remove all traces of mold to prevent re-growth.

5. Sealing: Once the mold is cleaned up, make sure you seal any gaps or cracks where moisture might seep in. This could include caulk around windows and doors, as well as sealing areas near floor vents that may allow water to pool.

6. Regular Check-ups: Even after addressing the immediate issue, keep an eye out for signs of dampness or mold growth. Early detection can prevent serious issues from arising.

Remember, while these steps can help manage mold, professional assistance is invaluable in ensuring a thorough and lasting solution. Don't hesitate to reach out if you need further guidance or support!

Hope this helps!

Posted by

Sani Admin

Answered on February 8, 2026 12:21 pm