Why is professional AC cleaning important in Dubai homes and offices?

Dubai’s climate creates constant high humidity inside AC systems, which encourages microbial growth. Without proper cleaning, AC units can circulate contaminants throughout indoor spaces.

How is Saniservice different from standard AC cleaning companies in the UAE?

Most AC cleaners focus on visible dust. Saniservice follows a scientific indoor environmental remediation process that targets microbial sources, moisture behavior, and airflow contamination.

Is AC mould common in Dubai buildings?

Yes. Due to year-round AC use, high humidity, and sealed buildings, AC-related microbial growth is extremely common in Dubai residential and commercial properties.

Why does simple AC duct cleaning often fail to solve air quality issues?

Duct cleaning alone does not address coils, drain pans, humidity imbalance, or microbial reservoirs. Without correcting these, contamination quickly returns.

How does Saniservice assess whether an AC system is contaminated?

We begin with system inspection and risk assessment, examining moisture patterns, airflow paths, and areas prone to microbial growth rather than relying on visual assumptions.

Why is fogging not an effective AC disinfection method?

Fogging treats air temporarily but does not remove contamination from coils, drains, or surfaces where microbes grow. It masks symptoms without solving root causes.

Can bleach be used safely inside AC systems?

Bleach fails because it does not penetrate biofilms, can corrode components, and does not correct humidity conditions that allow regrowth.

How does humidity affect AC hygiene in the UAE climate?

Humidity is the primary driver of microbial growth. Without addressing moisture behavior inside the system, cleaning alone will not deliver lasting results.

What does “medical-grade AC disinfection” actually mean?

It refers to controlled cleaning and disinfection methods aligned with indoor environmental health standards, not perfumes or cosmetic sanitizers.

How does Saniservice verify that AC cleaning was effective?

Where required, we use pre- and post-intervention validation methods to confirm that contamination levels have been meaningfully reduced.

Is AC cleaning necessary even if there is no visible mould?

Yes. Microbial contamination often exists inside coils and drains long before visible signs appear, especially in Dubai’s climate.

How often should AC systems be cleaned in Dubai?

Frequency depends on usage, humidity levels, and building type, but most UAE properties require more frequent intervention than cooler climates.

Can poor AC hygiene affect health?

Contaminated AC systems can circulate microbial fragments and irritants that may worsen respiratory symptoms and indoor comfort.

Why does Saniservice sometimes clean less than other companies?

Our methodology focuses on correct intervention. We avoid unnecessary disturbance that can spread contamination or damage system components.

Is this service suitable for villas, apartments, and commercial buildings?

Yes. The same scientific principles apply across residential, commercial, and sensitive environments in the UAE.

How does Saniservice handle AC cleaning in occupied spaces?

We use controlled procedures designed to minimize disruption and prevent the spread of contaminants during cleaning.

What role does airflow play in AC contamination?

Improper airflow allows moisture and particles to settle, creating ideal conditions for microbial growth inside the system.

Can AC cleaning reduce recurring odours?

Yes, when odours are caused by microbial growth or trapped moisture, addressing the source eliminates the problem rather than masking it.

Why is source identification important before disinfection?

Disinfection without understanding the cause leads to recurrence. Our process identifies why contamination formed in the first place.

Who should consider Saniservice’s AC cleaning and disinfection service?

Clients in Dubai who prioritize verified indoor air quality, occupant health, and long-term building performance rather than superficial cleaning.

Is dampness and mold common after basement flooding?« Back to Previous Page

After the heavy storms last month, I noticed a strange dampness in the basement. The area feels particularly cold even with the heating on, and there seems to be some sort of mold growing along the walls near the corner by the old water heater. Has anyone else experienced similar issues after flooding? What steps should I take to address this problem before it spreads further?

Posted by Min Matsumoto

Asked on February 9, 2026 9:11 pm

▲

▼

Absolutely, dampness and mold are quite common after basement flooding, especially in areas like Dubai where we experience heavy storms. The conditions you're describing – a cold sensation even with heating on and visible mold growth – align with what I've seen in similar situations.

In the UAE, including Dubai, post-flooding environments often create ideal conditions for mold to thrive. High humidity levels, coupled with poor ventilation in basements, can accelerate this process. Mold not only impacts indoor air quality but also poses health risks, especially for those who are sensitive or have respiratory issues.

Given your situation, it's crucial to address the issue promptly. First steps should include thoroughly drying out the affected area and ensuring adequate ventilation. Using dehumidifiers and fans can help reduce moisture levels. However, given the extent of the damage you've noticed, a professional inspection would be highly recommended. This will allow experts to assess the full scope of the problem and recommend appropriate remediation measures.

In Dubai, companies like Saniservice are well-versed in handling such situations according to local regulations. They can provide comprehensive cleaning services to remove mold, treat affected surfaces, and ensure the environment is safe for you and your family. Additionally, they offer advice on preventing future occurrences by addressing any structural or moisture management issues.

If you decide to take action, don’t hesitate to contact us at 800-MOLDS (or 800-66537) or email hello@saniservice.com for a free consultation. We can provide tailored advice and support to ensure your home is safe and healthy again.

Remember, addressing mold issues early on prevents them from spreading further and causing more extensive damage.

Posted by

Sani Admin

Answered on February 15, 2026 6:34 am