Why is professional AC cleaning important in Dubai homes and offices?

Dubai’s climate creates constant high humidity inside AC systems, which encourages microbial growth. Without proper cleaning, AC units can circulate contaminants throughout indoor spaces.

How is Saniservice different from standard AC cleaning companies in the UAE?

Most AC cleaners focus on visible dust. Saniservice follows a scientific indoor environmental remediation process that targets microbial sources, moisture behavior, and airflow contamination.

Is AC mould common in Dubai buildings?

Yes. Due to year-round AC use, high humidity, and sealed buildings, AC-related microbial growth is extremely common in Dubai residential and commercial properties.

Why does simple AC duct cleaning often fail to solve air quality issues?

Duct cleaning alone does not address coils, drain pans, humidity imbalance, or microbial reservoirs. Without correcting these, contamination quickly returns.

How does Saniservice assess whether an AC system is contaminated?

We begin with system inspection and risk assessment, examining moisture patterns, airflow paths, and areas prone to microbial growth rather than relying on visual assumptions.

Why is fogging not an effective AC disinfection method?

Fogging treats air temporarily but does not remove contamination from coils, drains, or surfaces where microbes grow. It masks symptoms without solving root causes.

Can bleach be used safely inside AC systems?

Bleach fails because it does not penetrate biofilms, can corrode components, and does not correct humidity conditions that allow regrowth.

How does humidity affect AC hygiene in the UAE climate?

Humidity is the primary driver of microbial growth. Without addressing moisture behavior inside the system, cleaning alone will not deliver lasting results.

What does “medical-grade AC disinfection” actually mean?

It refers to controlled cleaning and disinfection methods aligned with indoor environmental health standards, not perfumes or cosmetic sanitizers.

How does Saniservice verify that AC cleaning was effective?

Where required, we use pre- and post-intervention validation methods to confirm that contamination levels have been meaningfully reduced.

Is AC cleaning necessary even if there is no visible mould?

Yes. Microbial contamination often exists inside coils and drains long before visible signs appear, especially in Dubai’s climate.

How often should AC systems be cleaned in Dubai?

Frequency depends on usage, humidity levels, and building type, but most UAE properties require more frequent intervention than cooler climates.

Can poor AC hygiene affect health?

Contaminated AC systems can circulate microbial fragments and irritants that may worsen respiratory symptoms and indoor comfort.

Why does Saniservice sometimes clean less than other companies?

Our methodology focuses on correct intervention. We avoid unnecessary disturbance that can spread contamination or damage system components.

Is this service suitable for villas, apartments, and commercial buildings?

Yes. The same scientific principles apply across residential, commercial, and sensitive environments in the UAE.

How does Saniservice handle AC cleaning in occupied spaces?

We use controlled procedures designed to minimize disruption and prevent the spread of contaminants during cleaning.

What role does airflow play in AC contamination?

Improper airflow allows moisture and particles to settle, creating ideal conditions for microbial growth inside the system.

Can AC cleaning reduce recurring odours?

Yes, when odours are caused by microbial growth or trapped moisture, addressing the source eliminates the problem rather than masking it.

Why is source identification important before disinfection?

Disinfection without understanding the cause leads to recurrence. Our process identifies why contamination formed in the first place.

Who should consider Saniservice’s AC cleaning and disinfection service?

Clients in Dubai who prioritize verified indoor air quality, occupant health, and long-term building performance rather than superficial cleaning.

What should I clean to remove mold and mildew?« Back to Previous Page

After the rain last month, I noticed a damp spot on the ceiling of my living room. When I checked the area behind the wall, it was filled with mold and mildew. The smell is awful and I’m worried about potential health issues for us. What should be included in a thorough cleaning checklist to address this issue?

Posted by Thanh Kato

Asked on December 25, 2025 8:59 am

▲

▼

Cleaning mold and mildew can be quite challenging, particularly in areas like your living room where there’s been water damage from rain. It's important to act swiftly as prolonged exposure to moisture can lead to the growth of harmful microorganisms. Here are key steps you should follow:

Firstly, ensure that the area is well-ventilated and that you're using protective gear such as gloves, goggles, and a mask before starting any cleaning tasks. In Dubai/UAE, it's crucial to adhere to local health and safety guidelines when dealing with mold issues.

Start by addressing the source of moisture; this could mean fixing leaking pipes or ensuring proper drainage around your property. Once the immediate water hazard is dealt with, begin the cleaning process:

1. Preparation: Clear out any furniture that can be moved away from the affected area. Cover nearby surfaces you don't want to clean with plastic sheets to prevent cross-contamination.

2. Scrubbing: Use a solution of water and detergent or a commercial mold cleaner specifically designed for indoor use. For tough spots, a mixture of baking soda and vinegar might work well too. Scrub the walls, ceiling, and any surfaces that have been affected by mold thoroughly.

3. Drying: After cleaning, ensure all areas are completely dry before proceeding to the next step. This could take several days, so use fans or dehumidifiers if necessary to speed up the process.

4. Sealing: Once the area is clean and dry, you can apply a mold-resistant sealant to prevent future growth. Check for any gaps or cracks where moisture might seep in again.

5. Inspection: After cleaning, it’s crucial to inspect the area for any signs of mold regrowth. If you notice anything suspicious, consider hiring professionals for further inspection and remediation.

In Dubai, there are specific regulations regarding indoor air quality and mold management which might apply to your situation. It's advisable to stay informed about these guidelines or consult with local authorities if unsure.

If the mold issue seems extensive or persistent despite your efforts, it would be wise to call 800-MOLDS (800-66537) or email hello@saniservice.com for professional assistance. Their experts can provide a thorough inspection and recommend the best course of action tailored to your specific situation in Dubai.

Remember, dealing with mold isn't just about cleaning; it's also about ensuring long-term prevention and maintaining good indoor air quality.

Posted by

Sani Admin

Answered on December 27, 2025 4:58 am