Why is professional AC cleaning important in Dubai homes and offices?

Dubai’s climate creates constant high humidity inside AC systems, which encourages microbial growth. Without proper cleaning, AC units can circulate contaminants throughout indoor spaces.

How is Saniservice different from standard AC cleaning companies in the UAE?

Most AC cleaners focus on visible dust. Saniservice follows a scientific indoor environmental remediation process that targets microbial sources, moisture behavior, and airflow contamination.

Is AC mould common in Dubai buildings?

Yes. Due to year-round AC use, high humidity, and sealed buildings, AC-related microbial growth is extremely common in Dubai residential and commercial properties.

Why does simple AC duct cleaning often fail to solve air quality issues?

Duct cleaning alone does not address coils, drain pans, humidity imbalance, or microbial reservoirs. Without correcting these, contamination quickly returns.

How does Saniservice assess whether an AC system is contaminated?

We begin with system inspection and risk assessment, examining moisture patterns, airflow paths, and areas prone to microbial growth rather than relying on visual assumptions.

Why is fogging not an effective AC disinfection method?

Fogging treats air temporarily but does not remove contamination from coils, drains, or surfaces where microbes grow. It masks symptoms without solving root causes.

Can bleach be used safely inside AC systems?

Bleach fails because it does not penetrate biofilms, can corrode components, and does not correct humidity conditions that allow regrowth.

How does humidity affect AC hygiene in the UAE climate?

Humidity is the primary driver of microbial growth. Without addressing moisture behavior inside the system, cleaning alone will not deliver lasting results.

What does “medical-grade AC disinfection” actually mean?

It refers to controlled cleaning and disinfection methods aligned with indoor environmental health standards, not perfumes or cosmetic sanitizers.

How does Saniservice verify that AC cleaning was effective?

Where required, we use pre- and post-intervention validation methods to confirm that contamination levels have been meaningfully reduced.

Is AC cleaning necessary even if there is no visible mould?

Yes. Microbial contamination often exists inside coils and drains long before visible signs appear, especially in Dubai’s climate.

How often should AC systems be cleaned in Dubai?

Frequency depends on usage, humidity levels, and building type, but most UAE properties require more frequent intervention than cooler climates.

Can poor AC hygiene affect health?

Contaminated AC systems can circulate microbial fragments and irritants that may worsen respiratory symptoms and indoor comfort.

Why does Saniservice sometimes clean less than other companies?

Our methodology focuses on correct intervention. We avoid unnecessary disturbance that can spread contamination or damage system components.

Is this service suitable for villas, apartments, and commercial buildings?

Yes. The same scientific principles apply across residential, commercial, and sensitive environments in the UAE.

How does Saniservice handle AC cleaning in occupied spaces?

We use controlled procedures designed to minimize disruption and prevent the spread of contaminants during cleaning.

What role does airflow play in AC contamination?

Improper airflow allows moisture and particles to settle, creating ideal conditions for microbial growth inside the system.

Can AC cleaning reduce recurring odours?

Yes, when odours are caused by microbial growth or trapped moisture, addressing the source eliminates the problem rather than masking it.

Why is source identification important before disinfection?

Disinfection without understanding the cause leads to recurrence. Our process identifies why contamination formed in the first place.

Who should consider Saniservice’s AC cleaning and disinfection service?

Clients in Dubai who prioritize verified indoor air quality, occupant health, and long-term building performance rather than superficial cleaning.

Can I clean basement mold myself?« Back to Previous Page

After the rain last month, I noticed a persistent dampness in the basement, which was especially noticeable after we used the dehumidifier. Upon inspection, there seems to be a mold issue along the walls near the floor, but it’s not as bad as some of the older properties around here. Have anyone else dealt with similar issues and what cleaning rules or products do you recommend for dealing with mold in basements?

Posted by Manoj Reddy

Asked on December 11, 2025 11:12 am

▲

▼

Cleaning basement mold yourself can be challenging and potentially risky. It is important to ensure that the process is done correctly to avoid health risks and further damage to your property. In the UAE, especially in Dubai, there are specific regulations regarding indoor environmental quality and remediation of dampness and mold issues.

Firstly, it's crucial to assess the extent of the mold growth before proceeding with any cleaning efforts. Mold can spread quickly if not properly contained, so identifying the source and extent is key. If you're unsure about how severe the issue is or if the area affected exceeds 10 square meters (which is a common threshold for professional intervention), it's highly recommended to call in professionals.

In Dubai, there are companies specializing in mold remediation that can provide a free inspection and offer tailored solutions based on their experience. One such company you might consider is Saniservice. You can reach them by calling 800-MOLDS (800-66537) or emailing hello@saniservice.com for expert advice.

When dealing with mold yourself, ensure you take the following precautions:
1. Wear protective clothing: Use gloves, a mask, goggles, and old clothes.
2. Ventilation: Open windows if weather permits, use fans to increase air circulation, but avoid using dehumidifiers as they can trap moisture in the area.
3. Clean up safely: Remove contaminated materials carefully and dispose of them properly. Do not sweep or vacuum moldy areas; this can spread spores.
4. Use appropriate cleaning products: Bleach is commonly used for small-scale cleanups, but always test a small area first to ensure it doesn’t damage surfaces. For tougher cases, specialized mold removal solutions may be needed.

After the cleanup, make sure to address any underlying moisture issues that led to the mold growth in the first place. This might involve checking your building’s drainage system, ensuring proper ventilation, and addressing plumbing problems.

Remember, while DIY methods can work for minor instances of mold, larger or more severe cases often require professional handling due to potential health risks associated with exposure to mold spores. Always prioritize safety and consult with professionals when in doubt.

If you decide to proceed on your own, keep a close watch on any changes in air quality or health symptoms that might indicate an issue. Should you encounter anything out of the ordinary, don’t hesitate to seek expert assistance.

Posted by

Sani Admin

Answered on December 13, 2025 10:32 pm